When using the mobile crushing station, we must observe its possible problems at any time, solve them in time, and make records. These are all for the smooth progress of production. Then when the station is used, these four You must understand the most common phenomena.
Phenomenon 1: The amount of vibration increases suddenly
When the mobile crushing station is in use, there is a sudden increase in vibration, which may be related to the feeding of the equipment. If the feeding situation exceeds the processing capacity of the equipment, it will cause an increase in vibration. There is another situation. That is, when the equipment is replaced or assembled parts, it is not strictly in accordance with the standard, which causes it to not work normally and vibrates. In view of this phenomenon, we should not panic, first stop the machine to find out the cause, and then solve it according to the corresponding measures;
Phenomenon 2: There is percussive sound inside
When the mobile crushing station is in use, if there is an internal knocking sound, it may be caused by the loosening of the liner fasteners, and it needs to be stopped for treatment. The processing process is generally to clean the crushing cavity first, then check the fastening of the liner and the gap between the hammer and the liner, and replace the broken parts;
Phenomenon 3: bearing temperature is too high
If this happens in the mobile crushing station, it is caused by excessive or insufficient grease, dirty grease, and damage to the bearing. When this happens, it needs to be checked carefully and then carried out according to the specific situation. solve. If there is too much or insufficient grease, you need to reduce or add grease; but if the grease inside the mobile crushing station is contaminated and the bearing temperature rises, you need to clean the bearing and then replace the grease; Damaged bearings need to be replaced in time;
Phenomenon 4:the output is too large
It is the phenomenon that the size of the finished product after processing by the mobile crushing station is larger. The solution to this phenomenon is mainly to adjust the gap between the front and rear counterattack frames or replace the liner and the hammer, and adjust the position of the counterattack frame;
The article mainly introduces the four major abnormal phenomena in the use of mobile crushing stations. These abnormal conditions have a great impact on the working process of the equipment, so it needs to be solved in time. Here is the analysis of the causes and solutions of these four phenomena. The solution to the abnormal phenomenon of the mobile crushing station can help the smooth progress of production.
Post time: Nov-23-2021